Messaged Inputs
WARNING: This page is about a different car, the 2013 Ford F-550 Super Duty, 2013 Ford F-450 Super Duty, 2013 Ford F-350 Super Duty, and 2013 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
Module messaging has increased over time and has become the standard for sending and receiving information required to operate the IPC. For a complete list of module messages with the message origination sources, refer to MODULE COMMUNICATIONS NETWORK .
Listed below is a partial list of status and information messages that the IPC requires from other vehicle inputs:
- ABS
- ABS braking
- Roll Stability Control (RSC®)
- Stability/traction control
- Base brake system
- Brake fluid level status
- Parking brake status
- Lighting system
- LH/RH turn
- High beam
- Door ajar
- Powertrain
- Engine emission system
- Engine oil pressure
- Engine RPM
- Engine temperature
- Tow haul status
- Transmission range
- Vehicle speed
- Supplemental Restraint System (SRS)
- Tire Pressure Monitoring System (TPMS)
- Delayed accessory