3.7L, 5.0L (4V), 6.2L (2V)
WARNING: This page is about a different car, the 2013 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
The fuel system contains the following:
- Fuel tank assembly
- Easy Fill™ (capless) fuel tank filler pipe assembly (which cannot be modified in any way)
- Lifetime fuel filter (serviced as part of the Fuel Pump (FP) module)
- Fuel tube(s)
- Fuel vapor tubes
- Fresh air tube (located on top of the transmission)
- FP module containing:
- the electric FP, which provides pressurized fuel to the engine.
- the fuel level sensor.
- an inlet filter.
- a check valve which maintains system pressure after the pump is shut off.
- a pressure regulator.
The FP is controlled by the PCM which energizes the FP control module. Electrical power to the pump is provided through the FP control module.