LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2014 >> F-150 FX2, 2D Pickup >> Repair and Diagnosis >> External Pages >> Different car >> Section 224 (Engine Mechanical - 6.2L) >> In-Vehicle Repair >> Flexplate >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2013 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission. For additional information, refer to AUTOMATIC TRANSMISSION (6R80) .
  2. Rotate the engine clockwise until the 2 slotted holes on the flexplate are at the 6 o'clock position as shown in illustration.
    Fig 1: Locating Flexplate Slotted Holes
    G08339515Courtesy of FORD MOTOR CO.
  3. Remove the 8 bolts and the flexplate.
    • Discard the 8 flexplate bolts.
scientia non olet · About LEMON Manuals