LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2014 >> F-150 FX2, 2D Pickup >> Repair and Diagnosis >> External Pages >> Different car >> Section 224 (Engine Mechanical - 6.2L) >> In-Vehicle Repair >> Engine Oil Pressure (EOP) Switch >> Removal

Engine Oil Pressure (EOP) Switch: Removal

WARNING: This page is about a different car, the 2013 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Disconnect the Engine Oil Pressure (EOP) switch wiring harness retainer and the electrical connector.
  3. Remove the EOP switch.
scientia non olet · About LEMON Manuals