Turbocharger Oil Supply Tube LH: Removal

NOTE: Whenever turbocharger air intake system components are removed, always cover open ports to protect from debris. It is important that no foreign material enter the system. The turbocharger compressor vanes are susceptible to damage from even small particles. All components should be inspected and cleaned, if necessary, prior to installation or reassembly.

1. 1.
   
   Remove the turbocharger LH. REFER to: TURBOCHARGER - LH .

1. 2.
   
   Remove the lower turbocharger oil manifold assembly bolt and the turbocharger oil manifold assembly.

Courtesy of FORD MOTOR COMPANY

1. 3.
   
   Remove and discard the turbocharger oil tube assembly O-ring seal.

Courtesy of FORD MOTOR COMPANY