LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2014 >> F-150 FX2, 2D Pickup >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Power Brake Actuation - Brake Booster >> Removal And Installation >> Brake Vacuum Pump >> Removal

Brake Vacuum Pump: Removal

  1. Remove the RH  front fender inner splash shield. Refer to FRONT END BODY PANELS .
  2. G08336133
  3. NOTE: Do not use excessive force when removing the vacuum pump or the vacuum pump oil tube may be dilodged from the pump causing internal oil seal damage to the pump. If the oil tube becomes dislodged from the pump, a new vacuum pump must be installed.
    NOTE: The upper/inboard vacuum pump bolt will remain in the vacuum pump housing when removing the vacuum pump.
    G08336134
scientia non olet · About LEMON Manuals