LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2014 >> Escape S >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Information Center - Instrumentation, Message Center, And Warning Chimes >> General Procedures >> Reset the Oil Change Indicator >> Activation

Reset the Oil Change Indicator: Activation

  1. Without starting the engine, place the ignition in RUN.
  2. Simultaneously apply the accelerator and brake pedals and hold them in the fully applied position.
  3. After 3 seconds, the message center displays SERVICE: OIL RESET IN PROG.
  4. Continue to apply both the accelerator and brake pedals.
  5. The SERVICE: OIL RESET IN PROG message disappears after 25 seconds and the SERVICE: OIL RESET COMPLETE is displayed.
  6. Release both the accelerator and brake pedals.
  7. Place the ignition in OFF.
  8. The oil life reset procedure is complete.
scientia non olet · About LEMON Manuals