Symptom Chart: Warning Chimes

SYMPTOM DESCRIPTION

Condition	Possible Sources	Actions
All the chimes are inoperative	IPC	VERIFY the IPC gauges and indicators are functioning correctly. If the IPC gauges and indicators are not functioning correctly, GO to PINPOINT TEST A . If the IPC gauges and indicators are functioning correctly, INSTALL a new IPC . Refer to: INSTRUMENT PANEL CLUSTER (IPC) .
The active park assist chime is inoperative	Refer to the PINPOINT TEST	Starting with the ignition OFF, the driver door closed and the driver safety belt unbuckled, PLACE the ignition in ON and CHECK the safety belt warning chime. If the safety belt warning chime sounds, Refer to: PARKING AID . If the safety belt warning chime is inoperative, INSTALL a new IPC . Refer to: INSTRUMENT PANEL CLUSTER (IPC) .
The Belt-Minder® chime is inoperative	Refer to the PINPOINT TEST	GO to PINPOINT TEST AR
The Belt-Minder® cannot be deactivated	Refer to the PINPOINT TEST	GO to PINPOINT TEST AR
The chime always sounds	Refer to the PINPOINT TEST	GO to PINPOINT TEST AJ
The door ajar warning chime is inoperative or always sounds	Door ajar indication concern BCM IPC	VERIFY the safety belt warning chime operates for 6 seconds following ignition ON. If the safety belt warning chime sounds, diagnose the door ajar message center warning. GO to PINPOINT TEST AE If the safety belt warning chime does not sound, INSTALL a new IPC . Refer to: INSTRUMENT PANEL CLUSTER (IPC) .
The headlamps on warning chime is inoperative	Refer to the PINPOINT TEST	GO to PINPOINT TEST AK
The hill start assist chime is inoperative	Refer to the PINPOINT TEST	GO to PINPOINT TEST AL
The key-in-ignition warning chime is inoperative	Refer to the PINPOINT TEST	GO to PINPOINT TEST AM
The key left in vehicle chime is inoperative (push button start only)	Refer to the PINPOINT TEST	GO to PINPOINT TEST AN
The low fuel warning chime is inoperative or always sounds	Refer to the PINPOINT TEST	GO to PINPOINT TEST AO
The parking brake warning chime is inoperative	Refer to the PINPOINT TEST	GO to PINPOINT TEST AP
The perimeter alarm chime is inoperative	Refer to the PINPOINT TEST	VERIFY the perimeter alarm functions correctly and the headlamps on warning chime operates with the headlamps on, ignition OFF and the driver door open. If the perimeter alarm functions correctly and the headlamps on warning chime sounds, diagnose the perimeter alarm. Refer to: PERIMETER ANTI-THEFT ALARM . If the perimeter alarm functions correctly and the headlamps on warning chime does not sound, INSTALL a new IPC . Refer to: INSTRUMENT PANEL CLUSTER (IPC) . If the perimeter alarm does not operate correctly, Refer to: PERIMETER ANTI-THEFT ALARM .
The remote key programming chime is inoperative	Refer to the PINPOINT TEST	GO to PINPOINT TEST AQ
The safety belt warning chime is inoperative	Refer to the PINPOINT TEST	GO to PINPOINT TEST AR
The turn signal/hazard on warning chime is inoperative	Refer to the PINPOINT TEST	GO to PINPOINT TEST AS