LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2014 >> Edge Sport, AWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Power Brake Actuation - Brake Booster >> Removal And Installation >> Brake Booster - 2.0L >> Installation

Brake Booster - 2.0L: Installation

  1. NOTE: Do not press, pull or otherwise move the brake pedal while installing the stoplamp switch. Install this switch with the booster push rod attached to the brake pedal and with the brake pedal in the at-rest position. Installing this switch with the brake pedal in any other position results in incorrect adjustment and damages the switch.

    To install, reverse the removal procedure.

scientia non olet · About LEMON Manuals