Restraints Control Module (RCM)

NOTE: This vehicle may be equipped with SYNC®, which contains the 911 Assist™ option. Refer to the Owner's Literature for information about this feature.

The RCM monitors various sensor inputs and uses that data for controlling SRS outputs such as Belt-Minder® function and airbag deployment.

The RCM includes a backup power supply. This feature provides sufficient backup power to deploy the airbags in the event the ignition circuit is lost or damaged during impact. The backup power supply depletes its stored energy approximately one minute after power and/or ground has been removed from the RCM .

The RCM requires Programmable Module Installation (PMI) when being replaced. Refer to the diagnostic scan tool instructions to carry out Programmable Module Installation (PMI).

Refer to: AIRBAG AND SAFETY BELT PRETENSIONER SUPPLEMENTAL RESTRAINT SYSTEM (SRS) - SYSTEM OPERATION AND COMPONENT DESCRIPTION .