LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Fusion Titanium, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1172 (Engine Cooling System - 2.0L DURATEC - Hybrid (96KW/130PS) (Hybrid/ENERGI)) >> Removal And Installation >> Degas Bottle >> Installation

Degas Bottle: Installation

WARNING: This page is about a different car, the 2016 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

  1. 1.

    To install, reverse the removal procedure.

  1. 2.

    Fill the cooling system through the degas bottle to the MAX line.

    Material: Motorcraft ® Orange Prediluted Antifreeze/Coolant / VC-3DIL-B (WSS-M97B44-D2)

  1. 3.

    Perform the cooling system bleed procedure. Refer to: Cooling System Draining, Filling and Bleeding .
scientia non olet · About LEMON Manuals