LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Fusion Titanium, FWD >> Repair and Diagnosis >> Electrical >> Gauges >> Information Center - Instrumentation, Message Center, And Warning Chimes (Except Hybrid) >> Diagnosis and Testing >> Instrumentation, Message Center and Warning Chimes >> Pinpoint Tests >> PINPOINT TEST G: The Odometer Is Inoperative >> The Odometer Is Inoperative

The Odometer Is Inoperative

  1. G1 CHECK FOR CORRUPTED NON-VOLATILE MEMORY (NVM) 
    • Ignition ON.
    • Observe the message center display area.

    Does the odometer display ERROR? 

    1. Yes  : INSTALL a new IPC  .

      REFER to: INSTRUMENT PANEL CLUSTER (IPC)  .

    2. No  : GO to G2 
  2. G2 PERFORM THE IPC (INSTRUMENT PANEL CLUSTER) SELF-TEST 
    • Using a diagnostic scan tool, perform the IPC  self-test.

    Are any Diagnostic Trouble Codes (DTCs) recorded? 

    1. Yes  : REFER to DTC Chart: IPC .
    2. No  : GO to G3 
  3. G3 CHECK THE GWM (GATEWAY MODULE A) DIAGNOSTIC TROUBLE CODES (DTCS) 
    • Using a diagnostic scan tool, check the GWM  Continuous Memory Diagnostic Trouble Codes (DTCs).

    Are any Diagnostic Trouble Codes (DTCs) recorded? 

    1. Yes  : REFER to: COMMUNICATIONS NETWORK .
    2. No  : DIAGNOSE all PCM  Diagnostic Trouble Codes (DTCs). Refer to ENGINE CONTROLS - INTRODUCTION (EXCEPT DIESEL & HYBRID) (SECTION 0) .
scientia non olet · About LEMON Manuals