LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Fusion Titanium, FWD >> Repair and Diagnosis >> Electrical >> Gauges >> Information Center - Instrumentation, Message Center, And Warning Chimes (Except Hybrid) >> Diagnosis and Testing >> Instrumentation, Message Center and Warning Chimes >> Pinpoint Tests >> PINPOINT TEST AT: The Adaptive Cruise Control Warning Chime Is Inoperative >> The Adaptive Cruise Control Warning Chime Is Inoperative

The Adaptive Cruise Control Warning Chime Is Inoperative

  1. AT1 CHECK THE SAFETY BELT WARNING CHIME OPERATION 
    • Ignition OFF.
    • Ignition ON.
    • Unbuckle the driver safety belt.
    • Monitor the safety belt warning chime when the ignition is transitioned from OFF to RUN for 6 seconds.

    Does the safety belt warning chime operate for approximately 6 seconds? 

    1. Yes  : GO to AT2 
    2. No  : INSTALL a new IPC  .

      REFER to: INSTRUMENT PANEL CLUSTER (IPC)  .

  2. AT2 PERFORM THE IPC (INSTRUMENT PANEL CLUSTER) SELF-TEST 
    • Using a diagnostic scan tool, perform the IPC  self-test.

    Are any Diagnostic Trouble Codes (DTCs) recorded? 

    1. Yes  : REFER to DTC Chart: IPC .
    2. No  : GO to AT3 
  3. AT3 CHECK THE GWM (GATEWAY MODULE A) DIAGNOSTIC TROUBLE CODES (DTCS) 
    • Using a diagnostic scan tool, check the GWM  Continuous Memory Diagnostic Trouble Codes (DTCs).

    Are any Diagnostic Trouble Codes (DTCs) recorded? 

    1. Yes  : REFER to: COMMUNICATIONS NETWORK .
    2. No  : GO to AT4 
  4. AT4 CHECK THE CRUISE CONTROL DISPLAY IN THE MESSAGE CENTER 
    • Verify the adaptive cruise control display functions in the message center when the adaptive cruise control is in operation.

    Does the cruise control display operate in the message center? 

    1. Yes  : DIAGNOSE the cruise control system.

      REFER to: CRUISE CONTROL .

    2. No  : GO to PINPOINT TEST AK 
scientia non olet · About LEMON Manuals