LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Fusion Titanium, FWD >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Rear Disc Brake System (Except Hybrid) >> Removal and Installation >> Rear Brake Pads >> Installation

Rear Brake Pads: Installation

  1. NOTE: Make sure that the brake hose is not twisted when installing the brake caliper or damage to the brake flexible hose may occur.
    NOTE: Make sure the inboard brake pad anti-rattle spring is present or a rattle noise may occur.

    To install, reverse the removal procedure.

  2. Refer ELECTRONIC PARKING BRAKE (EPB) SERVICE MODE ACTIVATION AND DEACTIVATION .
  3. Depress the brake pedal several times, check the brake fluid level in the brake fluid reservoir and add the specified brake fluid as necessary.

    Material  : Motorcraft® DOT 4 LV High Performance Motor Vehicle Brake Fluid/PM-20 (WSS-M6C65-A2) (ISO 4925 Class 6)

scientia non olet · About LEMON Manuals