LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Fusion Titanium, FWD >> Repair and Diagnosis (Single Page) >> Brakes >> Anti-Lock Brakes >> Anti-Lock Brake System And Stability Control (Except Hybrid) >> Diagnosis and Testing >> Anti-Lock Brake System (ABS) and Stability Control >> Pinpoint Tests >> Pinpoint Test N: U3002:62 >> U3002:62

Pinpoint Test N: U3002:62: U3002:62

  1. N1 VERIFY THE PCM (POWERTRAIN CONTROL MODULE) VIN (VEHICLE IDENTIFICATION NUMBER) 
    • Ignition ON.
    • Using a diagnostic scan tool, compare the VIN  in the PCM  to the VIN  plate on the vehicle.

    Does the VIN in the PCM match the VIN plate? 

    1. Yes  : GO to N2 
    2. No  : RECONFIGURE the PCM  . FOLLOW the instructions on the diagnostic scan tool.
  2. N2 VERIFY THE ABS (ANTI-LOCK BRAKE SYSTEM) MODULE PART NUMBER 
    • Using a diagnostic scan tool, retrieve and record the ABS  module part number.
    • Compare the part number retrieved to the part number in the parts catalog or equivalent.

    Is the correct ABS module installed in the vehicle? 

    1. Yes  : CONFIGURE the ABS  module.

      REFER to: MODULE CONFIGURATION - SYSTEM OPERATION AND COMPONENT DESCRIPTION .

    2. No  : INSTALL a new ABS  module and HCU  assembly.

      REFER to: HYDRAULIC CONTROL UNIT (HCU)  .

scientia non olet · About LEMON Manuals