The One-Touch Up Feature Is Inoperative
- E1 INITIALIZE THE SUSPECT POWER WINDOW
- Carry out the initialization procedure on the suspect power window.
REFER to: POWER DOOR WINDOW INITIALIZATION .
Is the one-touch up feature operating correctly?
- Yes : The system is operating normally at this time. The window lost initialization.
- No
: For an inoperative LH
front window, INSTALL a new DDM
.
REFER to: DRIVER DOOR MODULE (DDM) .
For an inoperative LH rear window, INSTALL a new RDM LH .
REFER to: REAR DOOR MODULE (RDM) .
For an inoperative RH front window, INSTALL a new PDM .
REFER to: PASSENGER DOOR MODULE (PDM) .
For an inoperative RH rear window, INSTALL a new RDM RH .
REFER to: REAR DOOR MODULE (RDM) .
- Carry out the initialization procedure on the suspect power window.