Seatbelt Shoulder Height Adjuster: Removal

NOTE: Removal steps in this procedure may contain installation details.

1. 1.
   
   Remove the B-pillar trim panel. Refer to: B-PILLAR TRIM PANEL .

1. 2.
   
   

   1. 1.
      
      Remove the bolt.

      Torque: 30 lb.ft (40 Nm)

   1. 2.
      
      Rotate the seatbelt shoulder height adjuster to release the locking tab.

   1. 3.
      
      Remove the seatbelt shoulder height adjuster.

Courtesy of FORD MOTOR COMPANY