LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Fusion Titanium, FWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Bumper System (Except Hybrid) >> Disassembly and Assembly >> Rear Bumper Cover >> Disassembly

Rear Bumper Cover: Disassembly

NOTE: Removal steps in this procedure may contain installation details.
  1. WARNING: Before beginning any service procedure, refer to Safety Warnings in GENERAL INFORMATION -- FUSION . Failure to follow this instruction may result in serious personal injury.

    Refer to: HEALTH AND SAFETY PRECAUTIONS .

  2. Remove the rear bumper cover.

    Refer to: REAR BUMPER COVER  .

  3. Refer to: REAR PARKING AID SENSOR .

  4. On each side.
    G08637953
  5. G08637954
  6. G08637955
scientia non olet · About LEMON Manuals