LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Fusion Titanium, FWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Steering Column Switches >> Steering Column Electrical Components (Except Hybrid) >> Removal and Installation >> Ignition Lock Cylinder Housing >> Installation

Ignition Lock Cylinder Housing: Installation

NOTE: The ignition lock cylinder housing bolts must be tightened in the order of the following steps. Otherwise, binding of the ignition cylinder and ignition switch may occur.
  1. G08632158
  2. G08632161
  3. Refer to: STEERING COLUMN CONTROL MODULE (SCCM)  .
scientia non olet · About LEMON Manuals