System Operation: On

To enter ON mode, with a valid passive key inside the vehicle, press the ignition switch for a minimum of one second without pressing the brake pedal. Once the BCM  and RTM  indicate a valid passive key is present inside the vehicle and the BCM  has detected the ignition switch input without the stoplamp switch input, the BCM  activates the internal run/start relay and the BJB  run/start relay, providing ignition voltage to the various vehicle systems and modules. The BCM  communicates the ignition mode to the other modules by sending an ignition status message over the CAN  .

When the BCM  receives the on voltage input from the ignition switch, the BCM  activates the internal run/start relay and the BJB  run/start relay, providing ignition power to the various vehicle systems and modules. The BCM  communicates the ignition mode to the other modules by sending an ignition status message over the CAN  .