LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Fusion Titanium, FWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Steering Column Switches >> Steering Column Electrical Components (Except Hybrid) >> Description and Operation >> Steering Wheel and Column Electrical Components - System Operation and Component Description >> System Operation >> Off

System Operation: Off

To enter OFF mode, press the ignition switch without pressing the brake pedal while the vehicle is in ON mode or the engine is running. The passive key does not have to be in the vehicle to achieve OFF mode. However, the passive key must be present to achieve any other ignition mode.

When the engine is running and any one of the vehicle doors is opened and then closed, the presence of a passive key is determined. If the passive key is not present, the message center displays Key not detected to alert the driver the passive key is not present.

When the ignition switch is turned to the OFF position, the BCM  communicates the ignition mode to the other modules by sending an ignition status message over the CAN  .



When the ignition switch is turned to the OFF position, the BCM  communicates the ignition mode to the other modules by sending an ignition status message over the CAN  .

scientia non olet · About LEMON Manuals