Passenger Power Seat

The seat control switch contains normally closed contacts which are grounded. An individual circuit is switched to voltage when a specific adjustment position is selected. The seat control switch is hard-wired directly to the applicable seat motors. The motor direction is determined by the polarity of voltage supplied from the seat control switch.

The 4-way passenger power seat is equipped with the following motors:

• Horizontal motor (serviced with seat track assembly)
• Recliner motor (serviced with seat backrest assembly)

The 10-way passenger power seat is equipped with the following motors:

• Front height motor (serviced with seat track assembly)
• Rear height motor (serviced with seat track assembly)
• Horizontal motor (serviced with seat track assembly)
• Recliner motor (serviced with seat backrest assembly)
• Lumbar motor