Passive Key And Immobilizer System Message Displays

The IPC  provides the passive key and immobilizer system message center display to indicate the key is in the luggage compartment, the key is left in the vehicle, no key is detected, accessory power is active, to inform the driver a steering lock fault exists, to press the brake to start the vehicle or to place the key in the backup slot. The IPC  uses the push button start message input from the BCM  to display multiple message center messages.

The IPC  receives the push button start message display data from the GWM  over the High Speed Controller Area Network 3 (HS3-CAN).

The GWM  receives the push button start message display data from the BCM  over the High Speed Controller Area Network 1 (HS1-CAN).