LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Fusion Titanium, FWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Anti-Theft System - Perimeter (Except Hybrid) >> Diagnosis and Testing >> Perimeter Anti-Theft Alarm >> Symptom Chart >> Symptom Chart: Anti-Theft - Perimeter

Symptom Chart: Anti-Theft - Perimeter

Diagnostics in this service information assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: DIAGNOSTIC METHODS .

SYMPTOM CHART

Condition Possible Sources Actions
The alarm system does not activate from an unauthorized entry at the hood GO to PINPOINT TEST A 
The alarm system does not activate from an unauthorized entry at a door
  • Door ajar input
DIAGNOSE the courtesy lamps not illuminating when a door is open.
REFER to: INTERIOR LIGHTING .
The alarm system does not activate from an unauthorized entry at the luggage compartment lid
  • Luggage compartment lid input
DIAGNOSE the incorrect luggage compartment lid ajar indication.
REFER to: INSTRUMENTATION, MESSAGE CENTER AND WARNING CHIMES .
The alarm system does not arm or no turn signals flash confirmation GO to PINPOINT TEST B 
No horn output during alarm activation
  • Horn output concern
REFER to: HORN .
False alarm activation
  • Door ajar input
  • Hood switch input
  • Luggage compartment lid ajar input
  • Panic button pressed on a RKE  transmitter
  • A valid PATS  key read was NOT received when the ignition transitioned to RUN
  • An intermittent fault exists. MONITOR the BCM  alarm event Parameter Identifications (PIDs) to identify and isolate the cause of the last alarm activation.

    Most Recent Alarm Trigger Event (ALARM_1)

    2nd Most Recent Alarm Trigger Event (ALARM_2)

    3rd Most Recent Alarm Trigger Event (ALARM_3)

    4th Most Recent Alarm Trigger Event (ALARM_4)