LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Fusion Titanium, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 282 (Parking Brake System - Parking Brake & Actuation -- (Except Hybrid)) >> Removal And Installation >> Parking Brake Switch >> Installation

Parking Brake Switch: Installation

WARNING: This page is about a different car, the 2014 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
  2. NOTE: Anytime the parking brake switch electrical connector has been disconnected, the EPB  system is deactivated and a DTC  is stored in the ABS  module. Perform the following step to restore the EPB  system and clear the ABS  module DTC  .

    Apply and release the parking brake twice within 5 seconds, pausing with the switch in the NEUTRAL position for approximately one-half second between each apply and release.

scientia non olet · About LEMON Manuals