LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Fusion Titanium, AWD >> Repair and Diagnosis >> Electrical >> Gauges >> Information Center - Instrumentation, Message Center, And Warning Chimes (Except Hybrid) >> Diagnosis and Testing >> Instrumentation, Message Center and Warning Chimes >> Pinpoint Tests >> PINPOINT TEST BF: The Turn Signal-Hazard On Chime Or Turn Signal Left On Chime Is Inoperative >> The Turn Signal-Hazard On Chime Or Turn Signal Left On Chime Is Inoperative

The Turn Signal-Hazard On Chime Or Turn Signal Left On Chime Is Inoperative

  1. BF1 CHECK THE SAFETY BELT WARNING CHIME OPERATION 
    • Ignition OFF.
    • Ignition ON.
    • Unbuckle the driver safety belt.
    • Monitor the safety belt warning chime when the ignition is transitioned from OFF to RUN for 6 seconds.

    Does the safety belt warning chime operate for approximately 6 seconds? 

    1. Yes  : GO to BF2 
    2. No  : INSTALL a new IPC  .

      REFER to: INSTRUMENT PANEL CLUSTER (IPC)  .

  2. BF2 CHECK THE TURN SIGNAL INDICATOR OPERATION 
    • Verify the RH  and LH  turn signal indicators operate correctly.

    Do the turn signal indicators operate correctly? 

    1. Yes  : GO to BF3 
    2. No  : GO to PINPOINT TEST S 
  3. BF3 PERFORM THE BCM (BODY CONTROL MODULE) SELF-TEST 
    • Using a diagnostic scan tool, perform the BCM  self-test.

    Are any Diagnostic Trouble Codes (DTCs) recorded? 

    1. Yes  : REFER to: BODY CONTROL MODULE (BCM) .
    2. No  : DIAGNOSE all GWM  Diagnostic Trouble Codes (DTCs).

      REFER to: COMMUNICATIONS NETWORK .

scientia non olet · About LEMON Manuals