LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Fusion Titanium, AWD >> Repair and Diagnosis >> Electrical >> Gauges >> Information Center - Instrumentation, Message Center, And Warning Chimes (Except Hybrid) >> Diagnosis and Testing >> Instrumentation, Message Center and Warning Chimes >> Pinpoint Tests >> PINPOINT TEST BD: The Perimeter Alarm Chime Is Inoperative >> The Perimeter Alarm Chime Is Inoperative

The Perimeter Alarm Chime Is Inoperative

  1. BD1 CHECK THE SAFETY BELT WARNING CHIME OPERATION 
    • Ignition OFF.
    • Ignition ON.
    • Monitor the safety belt warning chime when the ignition switch is transitioned from OFF to RUN for 6 seconds.

    Does the safety belt warning chime operate for approximately 6 seconds? 

    1. Yes  : GO to BD2 
    2. No  : INSTALL a new IPC  .

      REFER to: INSTRUMENT PANEL CLUSTER (IPC)  .

  2. BD2 CHECK THE OPERATION OF THE PERIMETER ALARM 
    • Arm the perimeter alarm using the remote key locking feature (key fob).
    • Wait approximately 15 seconds for the system to arm.
    • Open the driver door using the interior door handle.

    Does the perimeter alarm sound after 12 seconds? 

    1. Yes  : GO to BD3 
    2. No  : REFER to: PERIMETER ANTI-THEFT ALARM .
  3. BD3 PERFORM THE IPC (INSTRUMENT PANEL CLUSTER) SELF-TEST 
    • Using a diagnostic scan tool, perform the IPC  self-test.

    Are any Diagnostic Trouble Codes (DTCs) recorded? 

    1. Yes  : REFER to DTC Chart: IPC .
    2. No  : GO to BD4 
  4. BD4 CHECK THE GWM (GATEWAY MODULE A) DIAGNOSTIC TROUBLE CODES (DTCS) 
    • Using a diagnostic scan tool, check the GWM  Continuous Memory Diagnostic Trouble Codes (DTCs).

    Are any Diagnostic Trouble Codes (DTCs) recorded? 

    1. Yes  : REFER to: COMMUNICATIONS NETWORK .
    2. No  : DIAGNOSE all BCM  Diagnostic Trouble Codes (DTCs).

      REFER to: BODY CONTROL MODULE (BCM) .

scientia non olet · About LEMON Manuals