LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Fusion Titanium, AWD >> Repair and Diagnosis >> Electrical >> Gauges >> Information Center - Instrumentation, Message Center, And Warning Chimes (Except Hybrid) >> Diagnosis and Testing >> Instrumentation, Message Center and Warning Chimes >> Pinpoint Tests >> PINPOINT TEST BA: The Lane Keeping Aid Warning Chime Is Inoperative >> The Lane Keeping Aid Warning Chime Is Inoperative

The Lane Keeping Aid Warning Chime Is Inoperative

  1. BA1 CHECK THE SAFETY BELT WARNING CHIME OPERATION 
    • Ignition OFF.
    • Ignition ON.
    • Unbuckle the driver safety belt.
    • Monitor the safety belt warning chime when the ignition is transitioned from OFF to RUN for 6 seconds.

    Does the safety belt warning chime operate for approximately 6 seconds? 

    1. Yes  : GO to BA2 
    2. No  : INSTALL a new IPC  .

      REFER to: INSTRUMENT PANEL CLUSTER (IPC)  .

  2. BA2 PERFORM THE IPC (INSTRUMENT PANEL CLUSTER) SELF-TEST 
    • Using a diagnostic scan tool, perform the IPC  self-test.

    Are any Diagnostic Trouble Codes (DTCs) recorded? 

    1. Yes  : REFER to DTC Chart: IPC .
    2. No  : GO to BA3 
  3. BA3 CHECK THE GWM (GATEWAY MODULE A) DIAGNOSTIC TROUBLE CODES (DTCS) 
    • Using a diagnostic scan tool, check the GWM  Continuous Memory Diagnostic Trouble Codes (DTCs).

    Are any Diagnostic Trouble Codes (DTCs) recorded? 

    1. Yes  : REFER to: COMMUNICATIONS NETWORK .
    2. No  : GO to BA4 
  4. BA4 CHECK THE LANE DEPARTURE SYSTEM OPERATION 
    • Verify the lane departure system operate correctly.

    Does the lane departure system operate correctly? 

    1. Yes  : The system is operating correctly at this time. Inform the customer that this chime only operates with the hands off the steering wheel.
    2. No  : REFER to: LANE DEPARTURE WARNING .
scientia non olet · About LEMON Manuals