The Active Park Assist/Parking Aid Chime Is Inoperative
- AS1 CHECK THE SAFETY BELT WARNING CHIME OPERATION
- Ignition OFF.
- Ignition ON.
- Unbuckle the driver safety belt.
- Monitor the safety belt warning chime when the ignition is transitioned from OFF to RUN for 6 seconds.
Does the safety belt warning chime operate for approximately 6 seconds?
- Yes : GO to AS2
- No
: INSTALL a new IPC
.
REFER to: INSTRUMENT PANEL CLUSTER (IPC) .
- AS2 VERIFY THE CHIMES FUNCTION THROUGH THE AUDIO SPEAKERS
- Ignition OFF.
- Ignition ON.
- Monitor the location of the safety belt warning chime (front/rear audio speakers or IPC ) when the ignition is transitioned from OFF to RUN.
Does the chime sound through the audio speakers?
- Yes : GO to AS4
- No : GO to AS3
- AS3 CHECK THE GWM (GATEWAY MODULE A) DIAGNOSTIC TROUBLE CODES (DTCS)
- Using a diagnostic scan tool, check the GWM Continuous Memory Diagnostic Trouble Codes (DTCs).
Are any Diagnostic Trouble Codes (DTCs) recorded?
- Yes : REFER to: COMMUNICATIONS NETWORK .
- No : GO to AS4
- AS4 PERFORM THE PARKING AID MODULE (PAM) SELF-TEST
- Using a diagnostic scan tool, perform the Parking Aid Module (PAM) self-test.
Are any Diagnostic Trouble Codes (DTCs) recorded?
- No : GO to AS5
REFER to: PARKING AID .
REFER to: PARKING AID - Vehicles With: Active Park Assist .
- AS5 PERFORM THE IPC (INSTRUMENT PANEL CLUSTER) SELF-TEST
- Using a diagnostic scan tool, perform the IPC self-test.
Are any Diagnostic Trouble Codes (DTCs) recorded?
- Yes : REFER to DTC Chart: IPC .
- No
: DIAGNOSE the audible parking aid.
REFER to: PARKING AID .
REFER to: PARKING AID - Vehicles With: Active Park Assist .