Pinpoint Test AY : The Key-In-Ignition Warning Chime Is Inoperative: Notes
WARNING: This page is about a different car, the 2015 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
The Key-In-Ignition Warning Chime Is Inoperative
Refer to Wiring Diagrams INSTRUMENT CLUSTER for schematic and connector information.
Normal Operation and Fault Conditions
See Key-In-Ignition Warning Chime. REFER to: Warning Chimes - 2.0L Duratec - Hybrid (96kW/130PS) - System Operation and Component Description
BCM DTC Fault Trigger Conditions
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| B10F1:14 | Key In Switch: Circuit Short To Ground or Open | A continuous and on-demand DTC that sets in the BCM if an open is detected on the key-in-ignition switch input with the ignition ON. |
Possible Sources
- Wiring, terminals or connectors
- Interior lighting concern
- Key-in-ignition switch (part of the ignition switch)
- BCM
- IPC