LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Fusion Hybrid Titanium >> Repair and Diagnosis >> External Pages >> Different car >> Section 570 (Information Center - Instrumentation, Message Center And Warning Chimes (Hybrid/ENERGI)) >> Description And Operation >> Instrument Panel Cluster (IPC) - 2.0L Duratec - Hybrid (96kW 130PS) - System Operation and Component Description >> Network Message Chart - Indicators

Network Message Chart - Indicators

WARNING: This page is about a different car, the 2015 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

Module Network Input Messages - IPC 

Broadcast Message Originating Module Message Purpose
ABS warning indicator request ABS module Input used to control the ABS warning indicator.
Air bag warning indicator request RCM Input used to control the air bag warning indicator.
Brake warning indicator request ABS module Input from the ABS for the parking brake input used to control the brake warning indicator.
Brake (red) warning indicator request ABS module Input from the ABS used to control the brake warning indicator.
Driver safety belt buckle status RCM Input used to control the safety belt warning indicator.
Fog lamp indicator request BCM Input used to control the fog lamp indicator.
High beam status BCM Input used to control the high beam indicator.
Ignition status BCM Ignition RUN, START and accessory states required for the IPC operating modes and fault reporting.
MIL request PCM Input used to control the MIL.
Parking brake warning indicator request ABS module Input used to control the parking brake indicator.
Parklamp status BCM Input used to control the lights on indicator.
Ready to drive request SOBDMC Input used to control the ready to drive indicator.
Red brake warning indicator request BCM Input for the brake fluid level status used to control the brake warning indicator.
Stability-traction control indicator request ABS module Input used to control the stability/traction control (sliding car icon) indicator.
Stability-traction control disabled indicator request ABS module Input used to control the stability/traction control disabled (sliding car OFF icon) indicator.
Tire pressure warning indicator BCM Input used to control the TPMS indicator.
Transmission gear display actual PCM Input used to display or flash the PRNDL indication.
Transmission shift mode display PCM Input used to control the select shift segment of the PRNDL indication.
Turn indication status BCM Input used to control the RH turn, LH turn and hazard indicators.
scientia non olet · About LEMON Manuals