LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Fusion Hybrid Titanium >> Repair and Diagnosis >> External Pages >> Different car >> Section 430 (Door Handles, Door Locks, Latches And Entry Systems (Except Hybrid/ENERGI)) >> Diagnosis And Testing >> Locks, Latches and Entry Systems >> DTC Charts >> RTM DTC Chart

RTM DTC Chart

WARNING: This page is about a different car, the 2015 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

Diagnostics in this service information assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods

DTC Description Action
U0146:00 Lost Communication With Gateway "A": No Sub Type Information GO to Pinpoint Test Y 
U0401:00 Invalid Data Received from ECM/PCM A: No Sub Type Information DIAGNOSE all non-network Diagnostic Trouble Codes (DTCs) from the PCM. REFER to the PCM DTC Chart in the appropriate Electronic Engine Controls article.
U0401:82 Invalid Data Received from ECM/PCM A: Alive / Sequence Counter Incorrect / Not Updated DIAGNOSE all non-network Diagnostic Trouble Codes (DTCs) from the PCM. REFER to the PCM DTC Chart in the appropriate Electronic Engine Controls article.
U1A00:00 Private Communication Network: No Sub Type Information GO to Pinpoint Test Z 
U2100:00 Initial Configuration Not Complete: No Sub Type Information PERFORM the PMI using as-built data. CLEAR the Diagnostic Trouble Codes (DTCs) and REPEAT the self-test. If the DTC returns, INSTALL a new RTM. REFER to: Radio Transceiver Module (RTM)
U3000:04 Control Module: System Internal Failure INSTALL a new RTM. REFER to: Radio Transceiver Module (RTM)