LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Fusion Hybrid Titanium >> Repair and Diagnosis >> External Pages >> Different car >> Section 327 (Fuel Tank & Lines - 2.0L -- (Except Hybrid)) >> Removal And Installation >> Fuel Level Sensor >> Installation

Fuel Level Sensor: Installation

WARNING: This page is about a different car, the 2014 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: Make sure to install a new Fuel Level Sensor O-ring seal.
    NOTE: Make sure the alignment tabs on the Fuel Level Sensor and the fuel tank meet prior to tightening the Fuel Level Sensor lock ring.

    To install, reverse the removal procedure.

scientia non olet · About LEMON Manuals