LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Fusion Hybrid Titanium >> Repair and Diagnosis >> External Pages >> Different car >> Section 327 (Fuel Tank & Lines - 2.0L -- (Except Hybrid)) >> Removal And Installation >> Fuel Level Sender >> Removal

Fuel Level Sender: Removal

WARNING: This page is about a different car, the 2014 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. WARNING: Before beginning any service procedure in this article, refer to Safety Warnings in GENERAL INFORMATION . Failure to follow this instruction may result in serious personal injury.

    Refer to: GASOLINE AND GASOLINE-ETHANOL FUEL SYSTEMS HEALTH AND SAFETY PRECAUTIONS .

  2. Remove the Fuel Pump and Sender Unit.

    Refer to: FUEL PUMP AND SENDER UNIT .

  3. G08637746