Fuel System
WARNING: This page is about a different car, the 2014 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
The fuel tank and lines consist of the:
- single container (L-shaped) or dual container (saddle-type) fuel tank.
- lifetime in tank fuel filter (serviced as part of the fuel pump).
- Easy Fuel™ (capless) fuel tank filler pipe assembly, which cannot be modified in any way and is serviced only by the installation of a new fuel tank filler pipe assembly.
- fuel level sensor.
- has fuel tubes (liquid and vapor).
- FPDM
- fuel tank pressure sensor (part of the fuel vapor tube assembly).
- fuel pump and sender.
The vehicle:
- has a serviceable fuel level sender mounted on the fuel pump module.
- has a fuel tank filler pipe which contains a restrictor plate to permit only unleaded fuel to be pumped into the fuel tank.
- has an Easy Fuel™ (capless) fuel tank filler pipe assembly, which cannot be modified in any way.
- has a supplemental refueling adapter located in the luggage compartment
- has a lifetime in tank fuel filter serviced as part of the fuel pump.
- has fuel tubes (liquid and vapor) combined in a bundle along with the brake tubes mounted on the underside of the floorpan and covered with a protective cover shield.
- has quick connect and spring lock fuel tube couplings.
- has a FPDM that shuts off fuel in the event of a collision.