LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Fusion Hybrid Titanium >> Repair and Diagnosis >> External Pages >> Different car >> Section 233 (Parking Aid System - Active Park Assist -- (Except Hybrid)) >> Diagnosis And Testing >> Parking Aid >> Pinpoint Test(s) >> Pinpoint Test B: B129C:14, B129D:14 >> Normal Operation and Fault Conditions

Normal Operation and Fault Conditions

WARNING: This page is about a different car, the 2014 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

The Parking Aid Module (PAM) continuously monitors the front active park assist sensor signals any time the ignition is on. When no signal is detected from an active park assist sensor, these Diagnostic Trouble Codes (DTCs) are set.

DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
B129C:14 Left Front Side Sensor: Circuit Short To Ground Or Open A continuous and on-demand DTC that sets when any of the left front active park assist sensor circuits are open or the sensor signal line is shorted to ground.
B129D:14 Right Front Side Sensor: Circuit Short To Ground Or Open A continuous and on-demand DTC that sets when any of the right front active park assist sensor circuits are open or the sensor signal line is shorted to ground.
scientia non olet · About LEMON Manuals