LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Fusion Hybrid Titanium >> Repair and Diagnosis >> External Pages >> Different car >> Section 1158 (Sunroof - Roof Opening Panel (Hybrid/ENERGI)) >> Removal And Installation >> Roof Opening Panel Frame >> Installation

Roof Opening Panel Frame: Installation

WARNING: This page is about a different car, the 2016 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

  1. 1.

    NOTE: The Timing Adjustment must be carried out before the motor is installed.

    If a new roof opening panel frame is being installed, transfer the parts in the following order.

    • Carry out the Timing Adjustment and transfer the roof opening panel motor. Refer to: Timing Adjustment .
    • Transfer the roof opening panel blinds.
    • Transfer the trough assembly.
    • Transfer the roof opening panel shield.

  1. 2.

    To install, reverse the removal procedure.