Component testing procedure
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Recline circuit | 11 and 1 | Recline | Closed circuit |
| 3 and 10 | Closed circuit | ||
| 11 and 3 | Incline | Closed circuit | |
| 1 and 10 | Closed circuit | ||
| Horizontal circuit | 11 and 17 | Aft | Closed circuit |
| 16 and 10 | Closed circuit | ||
| 11 and 16 | Fore | Closed circuit | |
| 17 and 10 | Closed circuit |