Component testing procedure
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Headlamp circuit | 4 and 12 | Off | Open circuit |
| Park | Open circuit | ||
| Low | Closed circuit | ||
| Auto | Open circuit | ||
| Autolamp circuit | 4 and 13 | Off | Open circuit |
| Park | Open circuit | ||
| Low | Open circuit | ||
| Auto | Closed circuit | ||
| Parking lamps | 4 and 11 | Off | Open circuit |
| Park | Closed circuit | ||
| Low | Open circuit | ||
| Auto | Open circuit | ||
| Fog lamps | 4 and 14 | Off | Open circuit |
| Fog lamps | Closed circuit | ||
| Dim + | 4 and 6 | Off | Open circuit |
| Dim + | Closed circuit | ||
| Dim - | 4 and 3 | Off | Open circuit |
| Dim - | Closed circuit | ||
| Off | 4 and 10 | Off | Closed circuit |
| Park | Open circuit | ||
| Low | Open circuit | ||
| Auto | Open circuit |