LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Fusion Hybrid Titanium >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Parking Aid System - Active Park Assist -- Hybrid >> General Procedures >> Elevation System Check >> Check

Elevation System Check: Check

  1. Turn the ignition ON, engine OFF.
    Fig 1: Identifying Elevation System Length
    G08056361Courtesy of FORD MOTOR CO.
  2. Set the parking brake.
  3. Place the gearshift in REVERSE (R) for rear parking aid sensors.
  4. Place the gearshift in DRIVE (D) for front parking aid sensors.
  5. Verify no audible alerts are heard. If audible alerts are heard, check to make sure the bumper is correctly installed and is not tilted downward so the sensor is pointing at the ground.
  6. If the audible warning tone is heard,

    Refer to: PARKING AID .