Front Active Park Assist Sensors: Removal

WARNING: This page is about a different car, the 2016 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Removal steps in this procedure may contain installation details.

1.

WARNING: Before beginning any service procedure, refer to Safety Warnings in General Information. Failure to follow this instruction may result in serious personal injury.

Refer to: Health and Safety Precautions .

2.

With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview .

3.

Remove the bolts, the screws, the pin-type retainers and the radiator deflector.

GFD71082

Courtesy of FORD MOTOR COMPANY

4.

Remove the front active park assist sensor.
1. 1.
  
  Disconnect the front active park assist sensor electrical connector.
1. 2.
  
  Release the tabs.
1. 3.
  
  Remove the front active park assist sensor from the bracket.

GFD71678

Courtesy of FORD MOTOR COMPANY