LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Fusion Energi Titanium >> Repair and Diagnosis >> External Pages >> Different car >> Section 1172 (Engine Cooling System - 2.0L DURATEC - Hybrid (96KW/130PS) (Hybrid/ENERGI)) >> Diagnosis And Testing >> Engine Cooling >> Component Tests >> Radiator Leak Test, Removed From Vehicle

Radiator Leak Test, Removed From Vehicle

WARNING: This page is about a different car, the 2016 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Never leak test an aluminum radiator in the same water that copper/brass radiators are tested in. Flux and caustic cleaners may be present in the cleaning tank and they will damage aluminum radiators.
NOTE: Clean the radiator before leak testing to avoid contamination of tank.

  1. 1.

    Leak test the radiator in clean water with air pressurized to 138 kPa (20 psi).
scientia non olet · About LEMON Manuals