Anti-Lock Brake System (ABS) Module

The ABS  module is attached directly to the HCU  and is the electronic control unit for the parking brake system. The ABS  module monitors all switch inputs, sensor inputs and HS-CAN messages that relate to the parking brake system, then directly controls the parking brake actuator motors. The ABS  module also sets Diagnostic Trouble Codes (DTCs) in the event that a system or component failure should occur. Refer to: ANTI-LOCK BRAKE SYSTEM (ABS) AND STABILITY CONTROL - VEHICLES BUILT UP TO: 03-JUNE-2013 .

Refer to: ANTI-LOCK BRAKE SYSTEM (ABS) AND STABILITY CONTROL - VEHICLES BUILT FROM: 20-MAY-2013 .