LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Fusion Energi Titanium >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brake System Actuation -- Hybrid >> Removal And Installation >> Brake Pedal and Bracket >> Installation

Brake Pedal and Bracket: Installation

  1. To install, reverse the removal procedure.
  2. NOTE: Make sure the brake booster rod is positioned correctly into the clevis block.
    NOTE: Apply the brake pedal several times to verify correct operation.
    G09055268
  3. Using the diagnostic scan tool, carry out the Regenerative Brake System Calibration routine.
scientia non olet · About LEMON Manuals