Ready To Drive Message Center Displays

The IPC  provides a ready to drive message center indicator, which is a redundant indication to the ready to drive indicator. The ready to drive message center indicator is displayed under 2 conditions. The first condition is when the vehicle is placed in START and can be reset or may time out. The second condition is when the vehicle is in START and the driver door is opened. The second condition is also accompanied by a single tone chime.

The IPC  receives the ready to drive request message from the GWM  over the High Speed Controller Area Network 3 (HS3-CAN). The GWM  receives the ready to drive request message from the SOBDMC  over the High Speed Controller Area Network 1 (HS1-CAN).