LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2013 >> Focus Titanium, 4D Sedan, Standard Trans, Gas >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Suspension - Except Electric >> Removal and Installation >> Wheel Bearing and Wheel Hub >> Removal

Wheel Bearing and Wheel Hub: Removal

NOTE: Suspension fasteners are critical parts that affect the performance of vital components and systems. Failure of these fasteners may result in major service expense. Use the same or equivalent parts if replacement is necessary. Do not use a replacement part of lesser quality or substitute design. Tighten fasteners as specified.
  1. Refer to: Brake Disc  ( BRAKE DISC ).
  2. Fig 1: Locating Wheel Bearing Connector
    G08055927Courtesy of FORD MOTOR CO.
  3. Discard the specified component. Follow local disposal regulations.
    Fig 2: Locating Wheel Bearing And Wheel Hub Bolts
    G08055928Courtesy of FORD MOTOR CO.