Rear Shock Absorber: Removal

NOTE: Suspension fasteners are critical parts that affect the performance of vital components and systems. Failure of these fasteners may result in major service expense. Use the same or equivalent parts if replacement is necessary. Do not use a replacement part of lesser quality or substitute design. Tighten fasteners as specified.

WARNING: Before beginning any service procedure in this service information, refer to Safety Warnings in SERVICE INFORMATION General Information. Failure to follow this instruction may result in serious personal injury.

Refer to: Health and Safety Precautions ( HEALTH AND SAFETY PRECAUTIONS ).
Refer to: Jacking and Lifting - Overview ( JACKING AND LIFTING - OVERVIEW ).
Discard the specified component. Follow local disposal regulations.
General Equipment : Vehicle/Axle Stands

Torque : 115 Nm

Fig 1: Identifying Trailing Arm Disposal Bolt
Courtesy of FORD MOTOR CO.
Discard the specified component. Follow local disposal regulations.
Torque : 25 Nm

Fig 2: Locating Rear Shock Absorber Disposal Bolts
Courtesy of FORD MOTOR CO.