Front Lower Arm: Removal

NOTE: Suspension fasteners are critical parts that affect the performance of vital components and systems. Failure of these fasteners may result in major service expense. Use the same or equivalent parts if replacement is necessary. Do not use a replacement part of lesser quality or substitute design. Tighten fasteners as specified.

Refer to: Spring .
NOTE: Fabricate a spacer.

NOTE: Focus, Focus-BEV and Focus-ST require different length spacers.
1. Focus, Focus-BEV.
2. Focus-ST.
Fig 1: Spacers Different Length Dimension
Courtesy of FORD MOTOR CO.
General Equipment : Transmission Jack

Fig 2: Checking Trailing Arm Support
Courtesy of FORD MOTOR CO.
Fig 3: Locating Front Lower Arm Disposal Bolt
Courtesy of FORD MOTOR CO.