Inspection and Verification
WARNING: This page is about a different variant/trim than selected.
- Verify the customer concern.
- Visually inspect for obvious signs of mechanical damage.
Visual Inspection Chart
MECHANICAL SPECIFICATIONS- Damaged or contaminated accessory drive belt
- Damaged or contaminated pulley(s)
- Incorrect accessory drive belt
- Incorrect fitment of the accessory drive belt
- Accessory drive belt tensioner
- Accessory drive belt idler pulley
- Generator
- Power steering pump
- Power steering pump leakage
- Air conditioning (A/C) compressor
- Pulley(s)
- Loose hardware
- If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.