Cylinder Block Specifications
WARNING: This page is about a different variant/trim than selected.
CYLINDER BLOCK SPECIFICATIONS
| Item | Specification |
|---|---|
| Cylinder bore diameter | 3.4449-3.4461 in (87.5-87.53 mm) |
| Cylinder bore maximum out-of-round | 0.0003 in (.008 mm) |
| Main bearing bore diameter | 2.245-2.246 in (57.018-57.04 mm) |
| Head gasket surface flatness | 0.1 mm (0.0039 in) - 0.05 mm (0.002 in)/200 mm (7.874 in) x 200 mm (7.874 in) |